Follow these easy steps to get your Zanussi ZEBF 249 W Refrigerator up and running in no time.
Remove all securing tapes from the refrigerator. Wash the inside of the appliance with lukewarm water and bicarbonate of soda (5 ml to 0.5 liter of water). Rinse and dry thoroughly. Avoid using detergents, abrasive powders, highly perfumed cleaning products, or wax polishes, as these can damage the surface and leave a strong odor.
Ensure the appliance is positioned away from heat sources such as cookers, radiators, or boilers, and avoid direct sunlight exposure. Allow for adequate ventilation by positioning the back of the appliance close to a wall but leaving the required distance for ventilation as stated in the installation instructions.
Allow the appliance to stand for 2 hours after installation to let the refrigerant settle. Plug in the appliance and switch on at the mains supply. Ensure the appliance is earthed and the electrical work required is completed by a qualified electrician.
Turn the thermostat control to a midway setting (3-4) and adjust the air circulation slider control, located on the back wall of the fridge section, to a midway position between 'MIN' and 'MAX'. The pilot light will illuminate. Leave the appliance for approximately 4 hours to reach the correct temperature before placing food inside.
Position the inner shelves using the runners provided within the refrigerator to suit your storage needs. Ensure that the vent in the back wall of the appliance is not obstructed, especially if using the appliance with the salad drawer removed.